Products
-
Micro Pen Linear Actuator (SMALL BUT POWERFUL) (LP12)
No Load Speed up to 10mm/s
Max Load up to 6kg (13.2lb)
Stroke Length up to 150mm (4.5in)
Low noise, steady speed
Built-in Hall switch
10% duty cycle (10 minutes)
Working temperature:-26℃ -+65℃
Protection class: IP55
-
Small Sleek Rod Tubular Linear Actuators(LP20)
● 20mm Diameter
● Min Installation Dimension =125mm+Stroke
● No Load Speed up to 12mm/s
● Max Load up to 15kg (33lb)
● Stroke Length up to 200mm (7.87in)
● Built-in Hall switch
● 10% duty cycle (10 minutes)
● Working temperature:-26℃ -+65℃
● Protection class: IP65 -
Micro Inline Linear Actuator with Feedback (LP26)
● 26mm Diameter
● No Load Speed up to 11.5mm/s
● Max Load up to 30kg (66lb)
● Stroke Length up to 400mm (15in)
● Low noise, steady speed
● Built-in Hall switch
● Hall Effect Synchronization
● Working temperature:-26℃ -+65℃
● Protection class: IP65
-
Miniature Screw Driven Linear Actuator (LP30)
● 30mm Diameter
● Min Installation Dimension =165mm+Stroke
● No Load Speed up to 11mm/s
● Max Load up to 35kg (66lb)
● Stroke Length up to 600mm (15in)
● Built-in Hall switch
● 10% duty cycle (10 minutes)
● Working temperature:-26℃ -+65℃
● Protection class: IP65
-
High Speed DC cinear Actuator(LP35)
● 35mm Diameter
● Min Installation Dimension =200mm+Stroke
● No Load Speed up to 135mm/s
● Max Load up to 180kg (397lb)
● Stroke Length up to 900mm (35.4in)
● Built-in Hall switch
● Working temperature:-26℃ -+65℃
● Protection class: IP67
● Hall Effect Synchronization
-
Waterproof Electric Linear Actuator IP67 (LP38)
● 38mm Diameter
● Min Installation Dimension =200mm+Stroke
● No Load Speed up to 45mm/s
● Max Load up to 220kg (485lb)
● Stroke Length up to 900mm (35.4in)
● Built-in Hall switch
● Working temperature:-26℃ -+65℃
● Protection class: IP67
● Hall Effect Synchronization
-
Low-cost dc linear actuators(LP40)
LP40 liear actuators are very easy to operate and install, with IP-65 protection and multiple options for position feedback. Stroke lengths from 50mm to600mm are available and all actuators come with pre-set limit switches so setup is quick and you never have to worry about overtravel. Aluminum construction provides the durability and corrosion resistance you need in a light-weight and compact body. The DC motor runs on 12 or 24 volts, and direction of motion is simply determined by the polarity of voltage applied to the motor.
-
Synchronous Control Board for Feedback Actuators
The lynpe Automation Synchronous Control Board allows you to move multiple Feedback actuators in step with the same speed irrespective of load. Unsynchronized actuators can lead to bending loads which is likely to be disastrous for both the load and the actuator.
-
Handheld Wired Control System for Actuators
Input Parameters
1. Input Voltage: 100~240VAC, 50Hz/60Hz
2. Input Current: 24VDC/4A max
Environment Parameters
1. Operating Temperature :0℃ ~40℃
2. Storage Temperature :-20℃ ~85℃
3. Insulation Intensity: 3000VAC1min input.output.
4. Insulation Resistance: pri. to sec. >50Mohm 500 VDC
-
Actuator Radio Frequency Remote Control System (RF)
Input Parameters
1. Input Voltage: 100~240VAC, 50Hz/60Hz
2. Input Current: 24VDC/2.5A max
3. 2.4GHz Wireless Receiver
Environment Parameters
1. Operating Temperature :0℃ ~40℃
2. Storage Temperature :-20℃ ~85℃
3. Insulation Intensity: 3000VAC1min input.<->output.
4. Insulation Resistance: pri. to sec. >50Mohm 500 VDC
